โครงการวิจัย

PRODUCTION OF COUPLING GENERATOR FOR MARINE VESSELS FROM BAKELITE MOULDING POWDER-FILLED ACRYLONITRILE BUTADIENE RUBBER

PRODUCTION OF COUPLING GENERATOR FOR MARINE VESSELS FROM BAKELITE MOULDING POWDER-FILLED ACRYLONITRILE BUTADIENE RUBBER Background A coupling generator for marine vessels is an engineering rubber product that requires exceptionally high modulus and hardness. It is generally made from acrylonitrile butadiene rubber (NBR) reinforced with relatively high loading of carbon black (CB) resulting in high compound […]

ZEOLITE POROUS MATERIAL DERIVED FROM INDUSTRIAL WASTES (CERAPORE)

Background The MTEC ceramic research team has expertise in the production of zeolite materials which can be utilized in several applications such as separation, purification and catalytic processes. This porous material can be synthesized from various raw materials including industrial wastes and mineral resources. The utilization of industrial wastes or clay minerals as a starting […]

Self-starting darrieus wind turbine

Introduction Energy crisis and global warming have stimulated an interest in developing renewable energy source for electricity generation. Thai government itself has issued a renewable policy and has set a plan to increase wind power capacity to be 3,002 MW in 2036 while the current installation is now at 224.47 MW. Different types of wind […]

Effect of sintering atmospheres
on properties of stainless steel

Background Standard Unit Supply (Thailand) Co., Ltd. (SUS) would like to investigate its compaction and sintering process to improve the slightly low corrosion resistance in some of its products. Prior to working with MTEC, SUS had consulted domestic and international experts but no practical solution could be found. Objective To improve the sintering process to […]

Failure Analysis of component used in petrochemical plant

Transfer Line Exchanger Gasket During the production of hydrocarbon compounds, the heat resistant gaskets coated with graphite on the transfer line exchanger (TLE) had degraded. While in service, the TLE was subjected to cracked gas at a temperature and pressure of 850 ºC and 1.5 ksc, respectively. Major maintenance of gaskets are usually carried out […]

1 8 9 10 11 12