© 2022 All rights reserved
National Metal and Materials Technology Center
Publications
Citation Index 2565
| No. | List of Publications | KRRN | Quartile | Impact Factor | No. |
|---|---|---|---|---|---|
| 1 | Adunphatcharaphon S, Elliott C.T, Sooksimuang T, Charlermroj R, Petchkongkaew A, Karoonuthaisiri N*. The evolution of multiplex detection of mycotoxins using immunoassay platform technologies. Journal of Hazardous Materials 2022; 432: art. no. 128706. | 125254 | 1 | 10.588 | 37 |
| 2 | Akaradechakul K, Chanthot P, Kerddonfag N, Pattamaprom C*. The effect of polycarbodiimide chain extender on thermal stability and mechanical properties of biobased poly(lactic acid)/natural rubber blown films. Journal of Plastic Film and Sheeting 2022; 38(3): 396-415. | 126191 | 2 | 2.694 | 81 |
| 3 | Amratisha K, Tuchinda W, Ruankham P, Naikaew A, Pansa-Ngat P, Srathongsian L, Wattanathana W, Shin Thant K, Supruangnet R, Nakajima H, Sahasithiwat S, Kanjanaboos P*. Graded multilayer triple cation perovskites for high speed and detectivity self-powered photodetector via scalable spray coating process. Scientific Reports 2022; 12(1): art. no. 11058. | 125568 | 1 | 4.996 | 57 |
| 4 | Aziz I.H*, Al Bakri Abdullah M.M*, Salleh M.A.A.M, Yoriya S, Razak R.A, Mohamed R, Baltatu M.S. The Investigation of Ground Granulated Blast Furnace Slag Geopolymer at High Temperature by Using Electron Backscatter Diffraction Analysis. Archives of Metallurgy and Materials 2022; 67(1): 227-231. | 125863 | 3 | 0.633 | 70 |
| 5 | Baimark Y*, Rungseesantivanon W, Prakymoramas N. Improvement in Crystallization and Toughness of Poly(L-lactide) by Melt Blending with Poly(L-lactide)-b-polyethylene glycol-b-poly(L-lactide) in the Presence of Chain Extender. Polymer Science - Series A 2022; 63: S34-S45. | 124486 | 3 | 1.382 | 32 |
| 6 | Baimark Y*, Rungseesantivanon W, Prakymoramas N. Preparation of stereocomplex-polylactide powder by precipitation method for potential use as nucleating agents in fully-biodegradable poly(L-lactide) composites. Materials Today Communications 2022; 33: art. no. 104539. | 126441 | 2 | 3.662 | 90 |
| 7 | Boopasiri S, Sae-Oui P, Siriwong, C*. Fabrication of microcrystalline cellulose/zinc oxide hybrid composite by hydrothermal synthesis and its application in rubber compounding. Journal of Applied Polymer Science 2022; 139(18): art. no. 52065. | 125698 | 1 | 3.057 | 59 |
| 8 | Boopasiri S, Thaptong P, Sae-Oui P, Siriwong, C*. Fabrication of zinc oxide-coated microcrystalline cellulose and its application in truck tire tread compounds. Journal of Applied Polymer Science 2022; 139(31): art. no. e52701. | 125477 | 2 | 3.057 | 50 |
| 9 | Borsup J, Eknapakul T, Thazin Myint H, Smith M, Yordsri V, Pinitsoontorn S, Thanachayanont C, Zaw Oo T, Songsiriritthigul P*. Formation and magnetic properties of low-temperature phase manganese bismuth prepared by low-temperature liquid phase sintering in vacuum. Journal of Magnetism and Magnetic Materials 2022; 544: art. no. 168661. | 124023 | 2 | 2.993 | 23 |
| 10 | Channasanon S, Praewpipat B, Duangjinda N, Sornchalerm L, Tesavibul P, Paecharoen S, Tanodekaew S*. 3D-printed medial arch supports of varying hardness versus a prefabricated arch support on plantar pressure: a 1-month randomized crossover study in healthy volunteers. Prosthetics and Orthotics International 2022; Article in Press. | 126046 | 2 | 1.672 | 77 |
| 11 | Chanthot P, Kerddonfag N, Pattamaprom C*. The Influence of Peroxide on Bubble Stability and Rheological Properties of Biobased Poly(lactic acid)/Natural Rubber Blown Films. Chinese Journal of Polymer Science 2022; 40(2): 197-207. | 126190 | 1 | 3.815 | 80 |
| 12 | Chanyathunyaroj K*, Moonrin N, Laungsopapun G, Phetchcrai S. Corrosion Fatigue Study of 6061 Aluminum Alloy: The Effect of Coatings on the Fatigue Characteristics. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2022; 53(8): 2874-2889. | 125832 | 1 | 2.726 | 69 |
| 13 | Charoensiddhi S*, Conlon M, Methacanon P, Thayanukul P, Hongsprabhas P, Zhang W. Gut microbiome modulation and gastrointestinal digestibility in vitro of polysaccharide-enriched extracts and seaweeds from Ulva rigida and Gracilaria fisheri. Journal of Functional Foods 2022; 96: art. no. 105204. | 125341 | 1 | 5.223 | 91 |
| 14 | Chobpattana V, Khemthong N, Ngok-Ngam W, Leelawattanachai J, Sodsai T, Kumnorkaew P, Muangnapoh T, Muangnapoh K*. Enhanced Solar Reflectance and Superhydrophobic Properties of Functionalized Silica-Coated Copper Phthalocyanine Pigments by the Sol-Gel Process. ACS Omega 2021; 6(43): 28671-28677. | 122557 | 1 | 3.512 | 6 |
| 15 | Choeycharoen P*, Sornlar W, Wannagon A. A sustainable bottom ash-based alkali-activated materials and geopolymers synthesized by using activator solutions from industrial wastes. Journal of Building Engineering 2022; 54: art. no. 104659. | 124247 | 1 | 5.318 | 27 |
| 16 | Chokemorh P, Pandee P, Chankitmunkong S, Patakham U, Limmaneevichitr C*. Primary Si refinement and eutectic Si modification in Al-20Si via P-Ce addition. Materails research express 2022; 9(3): art. no. 036501. | 125295 | 2 | 2.025 | 38 |
| 17 | Danwittayakul S*. A simple and reliable method to determine 0.5-ppm of nickel ions in wastewater. Chiang Mai Journal of Science 2021; 48(6): 1555-1563. | 123169 | 4 | 0.523 | 14 |
| 18 | Eang C, Nim B, Sreearunothai P, Petchsuk A, Opaprakasit P*. Chemical upcycling of polylactide (PLA) and its use in fabricating PLA-based super-hydrophobic and oleophilic electrospun nanofibers for oil absorption and oil/water separation. New Journal of Chemistry 2022; 46(31): 14933-14943. | 125435 | 1 | 3.925 | 46 |
| 19 | Gamonpilas C*, Benyajati C.-N, Sritham W, Soparat J, Limprayoon N, Seetapan N, Fuongfuchat A. Roles of viscosity, applied load and surface wettability on the lubrication behaviour of model liquid/semi-solid foods: Measurements with a bespoke tribo-cell fixture and rotational rheometer. Current Research in Food Science 2022; 5: 57-64. | 125050 | 1 | 6.269 | 34 |
| 20 | Henpraserttae P, Supothina S, Timakul P*. The Study of Ranong Metakaolin-Based Porous Geopolymers as Insulating Materials for Construction. Chiang Mai Journal of Science 2022; 49(1): 176-186. | 121549 | 4 | 0.523 | 1 |
| 21 | Himwas C*, Yordsri V, Thanachayanont C, Tchernycheva M, Panyakeow S, Kanjanachuchai S*. GaAs/GaAsPBi core-shell nanowires grown by molecular beam epitaxy. Nanotechnology 2022; 33(9): art. no. 095602. | 124058 | 1 | 3.874 | 24 |
| 22 | Israkarn K, Buathongjan C, Gamonpilas C, Methacanon P, Wisetsuwannaphum S*. Effects of gellan gum and calcium fortification on the rheological properties of mung bean protein and gellan gum mixtures. Journal of Food Science 2022; Article in Press. | 125897 | 2 | 3.693 | 71 |
| 23 | Jumpatam J*, Boonlakhorn J, Putasaeng B, Chanlek N, Thongbai P. Preparation, characterizations, dielectric properties and nonlinear behavior of (Na+1/3Ca2+1/3Yb3+1/3)Cu3Ti4O12 ceramics. Solid State Sciences 2022; 132: art. no. 106994. | 126185 | 2 | 3.752 | 96 |
| 24 | Kaeopisan A, Thanachayanon C, Wattanasarn H*. Tunable α-γ-phase of polyvinylidene fluoride to enhance piezoelectric coefficient. Journal of Polymer Research 2022; 29(6): art no. 235. | 124250 | 2 | 3.097 | 29 |
| 25 | Kaewkong P, Kosorn W, Sonthithai P, Lertwimol T, Thavornyutikarn B, Chantaweroad S, Janvikul W*. Chondrogenic Differentiation of Human Mesenchymal Stem Cells and Macrophage Polarization on 3D-Printed Poly(ε-caprolactone)/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Blended Scaffolds with Different Secondary Porous Structures. ACS Applied Bio Materials 2022; 5(6): 2689-2702. | 124248 | 1 | - | 28 |
| 26 | Kaewpengkrow P.R, Atong D, Sricharoenchaikul V*. Bio-fuel production from catalytic fast pyrolysis of Jatropha wastes using pyroprobe GC/MS and drop tube pyrolyzer. Journal of Analytical and Applied Pyrolysis 2022; 165: art. no. 105574. | 126213 | 1 | 6.437 | 82 |
| 27 | Kanchanapiya P, Tantisattayakul T*. Analysis of the additional cost of addressing per- and polyfluoroalkyl substance contamination from landfill leachate by reverse osmosis membranes in Thailand. Journal of Water Process Engineering 2022; 45: art. no. 102520. | 124328 | 1 | 5.485 | 31 |
| 28 | Kapanya T, Jiang B, He J, Qiu Y, Thanachayanont C, Sarakonsri T*. A combination of point defects and nanosized grains to minimize lattice thermal conductivity of sn and se co-doped CoSb3via mixed ball milling and spark plasma sintering. Surface Review and Letters 2021; 28(10): art. no. 2150089. | 124097 | 3 | 1.152 | 25 |
| 29 | Kongjaroen A, Methacanon P, Seetapan N, Fuongfuchat A. Gamonpilas C*, Nishinari K. Effects of dispersing media on the shear and extensional rheology of xanthan gum and guar gum-based thickeners used for dysphagia management. Food Hydrocolloids 2022; 132: art. no. 107857. | 125051 | 1 | 11.504 | 35 |
| 30 | Kum-onsa P, Putasaeng B, Manyam J, Thongbai P*. Significantly improved dielectric properties of poly(vinylidene fluoride) polymer nanocomposites by the addition of nAu−LaFeO3 hybrid particles. Materials Research Bulletin 2022; 146: art. no. 111603. | 121300 | 1 | 4.641 | 93 |
| 31 | Leelaruedee K, Leelachao S, Kuwahara H, Yongvanich N, Waree K, Wongpisan W, Wutikhun T, Lothongkum G, Visuttipitukul P*. Electrochemical and surface chemistry of amorphous chromium-zirconium film prepared by magnetron sputtering. Surfaces and Interfaces 2022; 31: art. no. 102036. | 126012 | 1 | 6.137 | 74 |
| 32 | Limtrakul A, Sae-Oui P, Nillawong M, Sirisinha C*. Influence of carbon black/silica hybrid ratio on properties of passenger car tire sidewall. Periodica Polytechnica Chemical Engineering 2022; 66(1): 147-156. | 125702 | 2 | 1.744 | 63 |
| 33 | Lin Y.H, Preechar Karin P*, Larpsuriyakul P, Ohtake N. Physicomechanical Characteristics of Carbon Fiber Reinforced Polymer Composite Using X-Ray Diffraction, Atomic Force and Electron Microscopies. International Journal of Automotive Technology 2022; 23(5): 1349-1363. | 125971 | 2 | 1.557 | 72 |
| 34 | Manotham S, Tesavibul P*. Effect of particle size on mechanical properties of alumina ceramic processed by photosensitive binder jetting with powder spattering technique. Journal of the European Ceramic Society 2022; 42(4): 1608-1617. | 122802 | 1 | 5.302 | 10 |
| 35 | Manpetch P, Singhapong W, Jaroenworaluck A*. A comparative study of TiO2 nanoparticles and Cu(II)/TiO2 nanocomposites on photodegradation of cinnamic acid (CA) under natural sunlight and artificial UV light. Journal of Dispersion Science and Technology 2022; Article in Press. | 126231 | 2 | 2.042 | 84 |
| 36 | Manpetch P, Singhapong W, Jaroenworaluck A*. Synthesis and characterization of a novel composite of rice husk-derived graphene oxide with titania microspheres (GO-RH/TiO2) for effective treatment of cationic dye methylene blue in aqueous solutions. Environmental Science and Pollution Research 2022; 29(42): 63917-63935. | 126228 | 1 | 5.19 | 83 |
| 37 | Matthujak A*, Wichangarm M, Sriveerakul T, Sucharitpwatskul S, Phongthanapanich S. Numerical investigation on the influences of swirling flow to thermal efficiency enhancement of an LPG-energy saving burner. Case Studies in Thermal Engineering 2021; 28: art. no. 101466. | 123406 | 1 | 6.268 | 16 |
| 38 | Mekcha P, Wongpairojpanich J, Thammarakcharoen F, Suwanprateeb J, Buranawat B*. Customized 3D printed nanohydroxyapatite bone block grafts for implant sites: a case series. Journal of Prosthodontic Research 2022; Article in Press. | 125427 | 1 | 4.642 | 45 |
| 39 | Naikaew A, Kumnorkaew P, Wattanathana W, Swe K.Z, Pansa-Ngat P, Amratisha K, Nakajima H, Supruangnet R, Krajangsang T, Sinthiptharakoon K, Sahasithiwat S, Kanjanaboos P*. Investigation of Double-Layered Pb-Sn Perovskite Absorbers: Formation, Structure, Band Alignment, and Stability. Journal of Physical Chemistry C 2022; 126(3): 1623-1634. | 123676 | 1 | 4.126 | 21 |
| 40 | Nanthananon P, Tanodekaew S, Tesavibul P, Manotham P, Kaewkong P, Channasanon S*. Enhancing the mechanical properties of photosensitive binder jetting PLA via dual curing and thermal treatment. Journal of Applied Polymer Science 2022; 139(15): art. no. 51942. | 126043 | 1 | 3.057 | 76 |
| 41 | Paisrisarn P, Yasui T*, Zhu Z, Klamchuen A, Klamchuen A, Wutikhun T, Yordsri V, Baba Y. Tailoring ZnO nanowire crystallinity and morphology for label-free capturing of extracellular vesicles. Nanoscale 2022; 14(12): 4484-4494. | 125826 | 1 | 7.79 | 92 |
| 42 | Patawanich P, Petdum A, Sirirak J, Chatree K, Charoenpanich A, Panchan W, Setthakarn K, Kamkaew A, Sooksimuang T, Maitarad P, Wanichacheva N*. Highly selective zinc(II) triggered “Turn-ON” [5]helicene-based fluorescence sensor: Its application in liver and brain cells imaging. Journal of Molecular Liquids 2022; 362: art. no. 119710. | 125489 | 1 | 6.633 | 52 |
| 43 | Petdum A, Kaewnok N, Panchan W, Charoenpanich A, Sirirak J, Sahasithiwat S, Sooksimuang T, Wanichacheva N*. Novel rapid “turn on” tetrahydro-[5]helicene-based fluorescence sensor for selective detection of Cd2+ with a remarkable large Stokes shift and its applications in food samples and living cell. Journal of Photochemistry and Photobiology A: Chemistry 2022; 423: art. no. 113578. | 125488 | 2 | 5.141 | 51 |
| 44 | Phattarateera S, Ausab R, Jemkuntod N, Wiriya-Amornchai A*. A local green composite study: the effect of edible oil on the morphological and mechanical properties of PBS/bentonite composite. Journal of Polymer Engineering 2022; 42(2): 109-117. | 122606 | 3 | 1.367 | 8 |
| 45 | Phusuwan U, Atong D, Nisamaneenate J, Sricharoenchaikul V*. Sustainable fuel production from steam reforming of waste motor oil over olivine-supported Fe catalyst. Energy Reports 2021; 7: 579-590. | 126235 | 1 | 4.937 | 86 |
| 46 | Pongchaiphol S, Suriyachai N, Hararak B, Raita M*, Laosiripojana N, Champreda V. Physicochemical characteristics of organosolv lignins from different lignocellulosic agricultural wastes. International Journal of Biological Macromolecules 2022; 216: 710-727. | 126386 | 1 | 8.025 | 89 |
| 47 | Ponghiransmith C, Lin J.-Y, Kobsiriphat W, Limthongkul P, Hasin P*. High-performance asymmetric supercapacitor achieved by CoS2 nanoparticles decorated polyaniline functionalized SBA-15-derived mesoporous nitrogen-doped carbon with rod-like architectures. Journal of Alloys and Compounds 2022; 898: art. no. 162773. | 122593 | 1 | 5.316 | 7 |
| 48 | Promoppatum P*, Taprachareon K, Chayasombat B, Tanprayoon D. Understanding size-dependent thermal, microstructural, mechanical behaviors of additively manufactured Ti-6Al-4V from experiments and thermo-metallurgical simulation. Journal of Manufacturing Processes 2022; 75: 1162-1174. | 123862 | 1 | 5.01 | 22 |
| 49 | Rattanakaran J, Saengrayap R, Aunsri N, Padee S, Prahsarn C, Kitazawa H, Bishop C.F.H, Chaiwong S*. Performance of thermal insulation covering materials to reduce postharvest losses in okra. Horticulturae 2021; 7(10): art. no. 392. | 122435 | 1 | 2.331 | 4 |
| 50 | Ren N, Petchsuk A, Opaprakasit M, Sreearunothai P, Opaprakasit P*. Surface modifications of low-density polyethylene films with hydrophobic and antibacterial properties by chitosan-based materials. Polymer-Plastics Technology and Materials 2022; 61(15): 1706-1718. | 125442 | 2 | 2.439 | 48 |
| 51 | Rico-Yuson C.A, Danwittayakul S, Kumar S, Hornyak G.L, Bora T*. Sequential dip-coating of CsPbBr3 perovskite films in ambient conditions and their photovoltaic performance. Journal of Materials Science 2022; 57(22): 10285-10298. | 125363 | 3 | 4.682 | 41 |
| 52 | Risangud N*, Kunkit N, Sungkhaphan P, Hankamolsiri W, Sornchalerm L, Thongkham S, Chansaenpak K. Amphiphilic polymeric photoinitiator composed of PEG-b-PCL diblock copolymer for three-dimensional printing of hydrogels. European Polymer Journal 2022; 168: art. no. 111094. | 123583 | 1 | 4.598 | 20 |
| 53 | Rodchom M, Wimuktiwan P, Soongprasit K, Atong D, Vichaphund S*. Preparation and characterization of ceramic materials with low thermal conductivity and high strength using high-calcium fly ash. International Journal of Minerals, Metallurgy and 2022; 29(8): 1635-1645. | 123466 | 1 | 3.85 | 19 |
| 54 | Saeheng C, Fuongfuchat A, Sriyai M, Daranarong D, Namhongsa M, Molloy R, Meepowpan P, Punyodom W. Microstructure, thermal and rheological properties of poly(L-lactide-co-ε-caprolactone) tapered block copolymer for potential use in biomedical applications. Journal of Applied Polymer Science 2022; Article in Press. | 126495 | 2 | 3.057 | 97 |
| 55 | Saengbunkoet S, Kerddonfag N, Puekpoonpoal N, Kumsang P, Yoksan R, Jariyasakoolroj P*. Structural evolution and related physical properties of machine direction oriented poly(butylene succinate-co-adipate) films. Polymer 2022; 249: art. no. 124859. | 126189 | 1 | 4.432 | 79 |
| 56 | Sanguanpak S, Shongkittikul W, Saengam C, Chiemchaisri W, Chiemchaisri C*. TiO2-immobilized porous geopolymer composite membrane for removal of antibiotics in hospital wastewater. Chemosphere 2022; 307: art. no. 135760. | 125362 | 1 | 8.943 | 40 |
| 57 | Santawitee O*, Chayasombat B, Thanachayanont C, Inpor K, Prichanont S*, Klinthongchai Y*, Phongphut A, Debéda H*. Screen-Printed Microcantilevers Coated With Functionalized Mesocellular Foam Silica for Detection of Solvent Vapors. IEEE Sensors Journal 2022; 22(17): 16837-16847. | 125467 | 1 | 4.325 | 49 |
| 58 | Sattawitchayapit S, Yordsri V, Panyavan P, Chookajorn T*. Solute and grain boundary strengthening effects in nanostructured Ni-Co alloys. Surface and Coatings Technology 2021; 42825: art. no. 127902. | 122486 | 1 | 5.302 | 5 |
| 59 | Seensattayawong P, Métais-Lagouarde P, Songkuea S, Manonukul A*. Comparison of Mechanical and Corrosion Properties for 17-4 PH Stainless Steel Fabricated by Metal Injection Moulding Using Varied Powder Sizes. Chiang Mai Journal of Science 2022; 49(1): 155-165. | 125537 | 4 | 0.507 | 55 |
| 60 | Seetapan N*, Leelawat B, Limparyoon N, Yooberg R. Effect of different extrusion methods on physicochemical properties and qualities of noodles based on rice flour. Food Science and Technology International 2021; Article in Press. | 122757 | 2 | 2.023 | 9 |
| 61 | Singhapong W, Jaroenworaluck A*, Srinophakun P. Low-temperature Processing Routes for Fabrication of Open-cell Mullite Foams by Silica Nanoparticles Derived from Rice Husk. Silicon 2022; 14(13): 7735-7753. | 126233 | 2 | 2.941 | 85 |
| 62 | Sinmongkolkul K, Rakkwamsuk P, Palathai T, Wattanarach S, Thavorniti P, Supothina S*. Purification of TiO2 from Leucoxene for the Synthesis of NIR-Reflective Cr-doped CaTiO3 Pigment Chiang Mai Journal of Science 2022; 49(1): 93-104. | 122917 | 4 | 0.507 | 12 |
| 63 | Sirichaivetkul R, Limmaneevichitr C, Tongsri R, Kajornchaiyakul J*. Isothermal Investigation and Deformation Behavior during Homogenization of 6063 Aluminum Alloy. Journal of Materials Engineering and Performance 2022; Aritcle in Press. | 125830 | 2 | 2.036 | 68 |
| 64 | Sirinwaranon P, Sricharoenchaikul V, Atong, D*. Catalytic performance of Co, Fe on MCM-41 synthesized from illite waste for gasification of torrefied cassava rhizome. Energy Reports 2021; 7: 149 - 162. | 125413 | 1 | 4.937 | 42 |
| 65 | Sitthisuwannakul W, Boonpavanitchakul K*, Wirunmongkol T, Muthitamongkol P, Kangwansupamonkon W*. A tunable controlled-release urea fertilizer coated with a biodegradable polyurethane-nanoclay composite layer. Journal of Coatings Technology and Research 2022; Article in Press. | 125587 | 2 | 2.339 | 95 |
| 66 | Somrang P*, Wannagon A, Choeycharoen P, Sornlar W. Strengthening geopolymer with selective sizes of concrete block waste. Chiang Mai Journal of Science 2021; 48(6): 1657-1678. | 121940 | 4 | 0.523 | 2 |
| 67 | Somseemee O, Saeoui P, Schevenels F.T, Siriwong, C*. Enhanced interfacial interaction between modified cellulose nanocrystals and epoxidized natural rubber via ultraviolet irradiation. Scientific Reports 2022; 12(1): art. no. 6682. | 125700 | 1 | 4.996 | 61 |
| 68 | Somseemee, O., Sae-Oui, P., Siriwong, C. Bio-based epoxidized natural rubber/chitosan/cellulose nanocrystal composites for enhancing mechanical properties, self-healing behavior and triboelectric nanogenerator performance. Cellulose 2022; 29(16): 8675-8693. | 125701 | 1 | 6.123 | 62 |
| 69 | Somton K*, Dateraksa K, Laoratanakul P. Slurry Optimisation for Fast Freeze-Drying of Porous Alumina. Ceramics - Silikaty 2021; 65(4): 368-376. | 123021 | 3 | 0.94 | 13 |
| 70 | Songkuea S, Montroussier N, Seensattayawong P, Manonukul A*. Effect of injection moulding sequences on mechanical properties of two-material metal injection moulding. Chiang Mai Journal of Science 2022; 49(1): 166-175. | 125536 | 4 | 0.507 | 54 |
| 71 | Sonthithai P, Hankamonsiri W, Lertwimol T, Uppanan P, Janvikul W*. A novel modified culture medium for enhancing redifferentiation of chondrocytes for cartilage tissue engineering applications. Biotechnology Progress 2022; 38(3): art. no. e3240. | 123407 | 2 | 2.681 | 17 |
| 72 | Soongprasit K, Sricharoenchaikul V, Atong D*. Selective aromatic production from fast pyrolysis of sugarcane bagasse lignin over ZSM-5 catalyst. Energy Reports 2021; 7: 830-843. | 126001 | 1 | 4.937 | 73 |
| 73 | Sopawong P, Warodomwichit D, Srichamnong W, Methacanon P, Tangsuphoom N*. Effect of physical and enzymatic modifications on composition, properties and in vitro starch digestibility of sacred lotus (Nelumbo nucifera) seed flour. Foods 2022; 11(16): art. no. 2473. | 125492 | 1 | 5.561 | 53 |
| 74 | Srijampan W, Wiengmoon A, Wanalerkngam A, Boonmee S, Yotkaew T, Tosangthum N, Tongsri R*. Identification of carbides and phase transformations in sintered Fe-Mo-Mn-C alloys produced under a slow continuous cooling. ISIJ International 2022; Aritcle in Press. | 125636 | 1 | 1.864 | 58 |
| 75 | Srimongkol S, Wiroonpochit P, Utra K, Sethayospongsa R, Muthitamongkol P, Methachan B, Butsri N, Srisawadi S*. Carbon-based conductive rubber composite for 3D printed flexible strain sensors. Polymers for Advanced Technologies 2022; Article in Press. | 126092 | 1 | 3.348 | 78 |
| 76 | Srion A, Thammarakcharoen F, Suwanprateeb J*. Fabrication of Monetite by a Controlled Phase Transformation of Three Dimensionally Printed Calcium Sulfate Construct. Chiang Mai Journal of Science 2022; 49(1): 131-144. | 125425 | 4 | 0.507 | 43 |
| 77 | Srisawad K, Kanjanaboos P, Wilairat P, Sahasithiwat S, Pakawatpanurut P*. Enhanced electroluminescence of cesium lead bromide light-emitting diode driven by ion migration via surface passivation with organic halide surfactants. Surfaces and Interfaces 2022; 30: art. no. 101853. | 125565 | 1 | 6.137 | 56 |
| 78 | Sukkasi S*, Tunnukit P, Lerspalungsanti S. Developing Assistive Bedside Furniture for Early Postoperative Mobilization in a Healthcare Setting With an Attentive Empathetic Design Approach. Health Environments Research and Design Journal 2022; 15(2): 331 - 346. | 122433 | 2 | 2.624 | 3 |
| 79 | Suwan M, Sangwong N, Atthi N, Pattamang P, Sripumkhai W, Supothina S*. Effect of micro-structural geometry on lubricant infiltration and property of slippery liquid-infused porous surfaces. Surface Review and Letters 2022; 29(2): art. no. 2250019. | 125309 | 3 | 1.24 | 39 |
| 80 | Suwannaharn N, Sanorpim S*, Yordsri V, Onabe K. Structural characterization of ELO-GaN film on mask-stripe patterned GaAs (0 0 1) substrate grown by metalorganic vapor phase epitaxy. Journal of Crystal Growth 2022; 593: art. no. 126772. | 126303 | 2 | 1.83 | 98 |
| 81 | Suwanpreecha C, Manonukul A*. A review on material extrusion additive manufacturing of metal and how it compares with metal injection moulding. Metals 2022; 12(3): art. no. 429. | 125752 | 1 | 2.695 | 65 |
| 82 | Suwanpreecha C, Manonukul A*. On the build orientation effect in as-printed and as-sintered bending properties of 17-4PH alloy fabricated by metal fused filament fabrication. Rapid Prototyping Journal 2022; 28(6): 1076-1085. | 125753 | 1 | 4.043 | 66 |
| 83 | Takian W, Rooppakhun S*, Ariyarit A, Sucharitpwatskul S. Optimal conformity design of tibial insert component based on ISO standard wear test using finite element analysis and surrogate model. Symmetry 2021; 13(12): art. no. 2377. | 123405 | 2 | 2.713 | 15 |
| 84 | Tangsritrakul J*., Wichittanakom C, Dokkhan C, Loykulnant S. Influence of Calcination Temperature on Structure-Property Relationship in BCZT Lead-Free Piezoceramic. Integrated Ferroelectrics 2021; 223(1): 104-117. | 124173 | 3 | 0.836 | 26 |
| 85 | Tanodekaew S*, Channasanon S, Kaewkong P. Physico-chemical properties and biocompatibility of in situ-hardening polylactide/nano hydroxyapatite composite for bone substitute. International Journal of Polymeric Materials and Polymeric Biomaterials 2021; Article in Press. | 126042 | 2 | 3.221 | 75 |
| 86 | Tapangnoi P, Sae-Oui P, Naebpetch W, Siriwong C*. Preparation of purified spent coffee ground and its reinforcement in natural rubber composite. Arabian Journal of Chemistry 2022; 15(7): art. no. 103917. | 125699 | 1 | 6.212 | 60 |
| 87 | Thammarakcharoen F, Srion A, Chokevivat W, Hemstapat R, Morales N.P, Suwanprateeb J*. Development of Polycaprolactone Infiltrated Anti-Tuberculosis Drug-Loaded 3D-Printed Hydroxyapatite for Localized and Sustained Drug Release in Bone and Joint Tuberculosis Treatment. Chiang Mai Journal of Science 2022; 49(1): 105-121. | 125426 | 4 | 0.507 | 44 |
| 88 | Thananukul K, Kaewsaneha C, Sreearunothai P, Petchsuk A, Buchatip S, Supmak W, Nim B, Okubo M, Opaprakasit P*. Biocompatible Degradable Hollow Nanoparticles from Curable Copolymers of Polylactic Acid for UV-Shielding Cosmetics. ACS Applied Nano Materials 2022; 5(3): 4473-4483. | 125438 | 1 | 6.14 | 47 |
| 89 | Thaptong P, Sae-Oui P, Jittham P, Sirisinha C*. Optimization of highly dispersible silica/carbon black hybrid filler ratio for tire tread based on solution- and emulsion-styrene butadiene rubber. Journal of Applied Polymer Science 2022; 139(29): art. no. e52608. | 124278 | 2 | 3.125 | 30 |
| 90 | Todhanakasem T*, Panjapiyakul S, Koombhongse P. Novel pineapple leaf fibre composites coating with antimicrobial compound as a potential food packaging. Packaging Technology and Science 2022; 35(1): 97-105. | 125090 | 2 | 2.545 | 36 |
| 91 | Truong D.C, Thaowonkaew S, Muthitamongkol P, Horprathum M, Kumar M, Le T.B.N, Pham A.T.T, Seetawan T, Vora-ud A, Phan T.B. Relaxation of residual stress-controlled thermopower factor in transparent-flexible Ti-doped ZnO thin films. Ceramics International 2022; 48(2): 2605-2613. | 125734 | 1 | 4.527 | 94 |
| 92 | Vichaphund S, Wimuktiwan P, Soongprasit C, Sricharoenchaikul V, Atong D*. Aromatic and aliphatic production of catalytic pyrolysis of lignin using ZSM-5/Al-SBA-15 catalyst derived from high-calcium fly ash. Energy Reports 2021; 7: 232-247. | 123441 | 1 | 4.937 | 18 |
| 93 | Wannid P, Hararak B, Padee S, Klinsukhon W, Suwannamek N, Raita M, Khao-on K, Prahsarn C*. Structural and Thermal Characteristics of Novel Organosolv Lignins Extracted from Thai Biomass Residues: A Guide for Processing. Journal of Polymers and the Environment 2022; 30(7): 2739-2750. | 122916 | 2 | 3.667 | 11 |
| 94 | Wattanarach S, Supothina S, Thavorniti P*. Preparation and properties of metakaolin based porous geopolymer formed with sodium perborate. Journal of Asian Ceramic Societies 2022; 10(3): 567-574. | 125774 | 2 | 2.546 | 67 |
| 95 | Wattanasarn H*, Ngennam T, Sumpao T, Thanachayanont C, Seetawan T. The charging performance in contact electrification of fluorinated ethylene propylene surfaces by electrode bridge. Sensors and Actuators A: Physical 2022; 34616: art. no. 113881. | 126343 | 1 | 4.291 | 88 |
| 96 | Winotapun C*, Hararak B, Treetong A, Chaloeijitkul K, Sane A. Self-assembly of colloidal lignin nanosphere particles blended with chitosan composite coated bagasse paper: An eco-friendly food packaging with antimicrobial properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2022; 655: art. no. 130207. | 126297 | 2 | 5.518 | 87 |
| 97 | Wiroonpochit P, Keawmaungkom S, Chisti Y, Hansupalak N*. Compositing prevulcanized natural rubber with multiwalled carbon nanotubes to make antistatic films. Polymers for Advanced Technologies 2022; 33(5): 1591-1605. | 125040 | 1 | 3.348 | 33 |
| 98 | Yoriya, S*., Tepsri, P. Investigation of Metal and Trace Elements of Cenospheres from Lignite High-Calcium Fly Ash (Thailand). Water 2021; 13(20): art. no. 2935. | 125740 | 1 | 3.53 | 64 |
