337 Views
| No. | List of Publications |
|---|---|
| 1 | Anutrasakda W*, Pitakjakpipop P. Performances of mesoporous silica-supported nickel phosphide nanocatalysts in the one-pot transformation of cellobiose to sorbitol. Catalysis Today 2020; Article in press. |
| 2 | Apithanyasai S, Supakata N*, Papong S. The potential of industrial waste: using foundry sand with fly ash and electric arc furnace slag for geopolymer brick production. Heliyon 2020; 6(3): art. no. e03697. |
| 3 | Asasutjarit R*, Managit C, Phanaksri T, Treesuppharat W, Fuongfuchat A. Formulation development and in vitro evaluation of transferrin-conjugated liposomes as a carrier of ganciclovir targeting the retina. International Journal of Pharmaceutics 2020; 577: art. no. 119084. |
| 4 | Asasutjarit R*, Sookdee P, Veeranondha S, Fuongfuchat A, Itharat A. Application of film-forming solution as a transdermal delivery system of piperine-rich herbal mixture extract for anti-inflammation. Heliyon 2020; 6(6): art. no. e04139. |
| 5 | Boonrasri S*, Sae-Oui P, Rachtanapun P*. Chitosan and natural rubber latex biocomposite prepared by incorporating negatively charged chitosan dispersion. Molecules 2020; 25(12): art. no. 2777. |
| 6 | Boonta W, Talodthaisong C, Sattayaporn S, Chaicham C, Chaicham A, Sahasithiwat S, Kangkaew L, Kulchat S*. The synthesis of nitrogen and sulfur co-doped graphene quantum dots for fluorescence detection of cobalt(ii) ions in water. Materials Chemistry Frontiers 2020; 4(2): 507-516. |
| 7 | Boonthanakorn J, Daud W, Aontee A, Wongs-Aree C*. Quality preservation of fresh-cut durian cv. ‘Monthong’ using micro-perforated PET/PE films. Food Packaging and Shelf Life 2020; 23: art. no. 100452 |
| 8 | Buathongjan C, Israkarn K, Sangwan W, Outrequin T, Gamonpilas C, Methacanon P*. Studies on chemical composition, rheological and antioxidant properties of pectin isolated from Riang (Parkia timoriana (DC.) Merr.) pod. International Journal of Biological Macromolecules 2020; 164: 4575-4582. |
| 9 | Bunmechimma L, Leejarkpai T, Riyajan S.-A*. Fabrication and physical properties of a novel macroporous poly(vinyl alcohol)/cellulose fibre product. Carbohydrate Polymers 2020; 240: art. no. 116215. |
| 10 | Chanyathunyaroj K*, Phetchcrai S, Laungsopapun G, Rengsomboon A. Fatigue characteristics of 6061 aluminum alloy subject to 3.5% NaCl environment. International Journal of Fatigue 2020; 133: art. no. 105420. |
| 11 | Dilokekunakul W, Klomkliang N*, Phadungbut P, Chaemchuen S, Supasitmongkol S. Effects of functional group concentration, type, and configuration on their saturation of methanol adsorption on functionalized graphite. Applied Surface Science 2020; 501: art. no. 144121. |
| 12 | Dilokekunakul W, Teerachawanwong P, Klomkliang N*, Supasitmongkol S*, Chaemchuen S. Effects of nitrogen and oxygen functional groups and pore width of activated carbon on carbon dioxide capture: Temperature dependence. Chemical Engineering Journal 2020; 389: art. no. 124413. |
| 13 | Jumpatam J, Putasaeng B, Chanlek N, Boonlakhorn J, Thongbai P*, Phromviyo N, Chindaprasirt P. Significantly improving the giant dielectric properties of CaCu3Ti4O12 ceramics by co-doping with Sr2+ and F- ions. Materials Research Bulletin 2021; 133: art. no. 111043. |
| 14 | Kaewmala S, Wiriya N, Chantrasuwan P, Yordsri V, Limphirat W, Muhammad S, Yoon W.-S, Nash J, Srilomsak S, Limthongkul P*, Meethong N*. A multiscale investigation elucidating the structural complexities and electrochemical properties of layered-layered composite cathode materials synthesized at low temperatures. Physical Chemistry Chemical Physics 2020; 22(10): 5439-5448. |
| 15 | Kraithong S, Panchan W, Charoenpanich A, Sirirak J, Sahasithiwat S, Swanglap P, Promarak V, Thamyongkit P, Wanichacheva N*. A method to detect Hg2+ in vegetable via a “Turn–ON” Hg2+–Fluorescent sensor with a nanomolar sensitivity. Journal of Photochemistry and Photobiology A: Chemistry 2020; 389: art. no. 112224. |
| 16 | Kumnorkaew P, Rattanawichai N, Ratanatawanate C, Yoriya S, Lohawet K, Zhao Y, Vas-Umnuay P*. Influence of PbS quantum dots-doped TiO2 nanotubes in TiO2 film as an electron transport layer for enhanced perovskite solar cell performance. IEEE Journal of Photovoltaics 2020; 10(1): art. no. 8897701: 287-295. |
| 17 | Kum-onsa P, Chanlek N, Putasaeng B, Thongbai P*. Improvement in dielectric properties of poly(vinylidene fluoride) by incorporation of Au–BiFeO3 hybrid nanoparticles. Ceramics International 2020; 46(11): 17272-17279. |
| 18 | Lerspalungsanti S*, Pitaksapsin N, Viriyarattanasak P, Srisurangkul C, Olarnrithinun S. Study on the strength of converted school pick-up truck’s roof in case of rollover accidents. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 2020; 234(8): 2228-2238. |
| 19 | Malatip A*, Prasomsuk N, Siriparu C, Paoprasert N, Otarawanna S. An efficient matrix tridiagonalization method for 3D finite element analysis of free vibration. Mathematics and Computers in Simulation 2020; 172: , Pages 90-110. |
| 20 | Na Nakorn K.R, Lerdkamjornwat W, Chinkanjanarot S, Phadungbut P*, Klomkliang N. In silico analysis of argon adsorption and porous properties of Fe-soc-MOF pre-adsorbed with nonpolar and polar fluids. Microporous and Mesoporous Materials 2020; 303: art. no. 110266. |
| 21 | Na Rungsi A, Luengnaruemitchai A*, Chollacoop N, Chen S.-Y*, Mochizuki T, Takagi H, Yoshimura Y. Preparation of MCM-41-supported Pd–Pt catalysts with enhanced activity and sulfur resistance for partial hydrogenation of soybean oil-derived biodiesel fuel. Applied Catalysis A: General 2020; 590: art. no. 117351. |
| 22 | Nawaukkaratharnant N, Sujaridworakun P, Mongkolkachit C, Wasanapiarnpong T*. Possible use of waste from marcasite jewelry industry as iron pyrite source incorporated with titanium dioxide for photodegradation of lignin under a halogen tungsten lamp. Materials Letters 2020; 271: art. no. 127778. |
| 23 | Nim B, Opaprakasit M, Petchsuk A, Opaprakasit P*. Microwave-assisted chemical recycling of polylactide (PLA) by alcoholysis with various diols. Polymer Degradation and Stability 2020; 181: art. no. 109363. |
| 24 | Otarawanna S*, Ngiamsoongnirn K, Malatip A, Eiamaram P, Phongthanapanich S, Juntasaro E, Kowitwarangkul P, Intarakumthornchai T, Boonmalert P, Bhothikhun C. An educational software suite for comprehensive learning of Computer-Aided Engineering. Computer Applications in Engineering Education 2020; 28(5): 1083-1109. |
| 25 | Otatawong S, Boonlakhorn J, Danwittayakul S, Thongbai P*. CaCu3Ti4O12/In0.05Nb0.05Ti0.90O12 composite ceramics: An effectively improved method to reduce the dielectric loss tangent and retain high dielectric permittivity. Materials Research Bulletin 2020; 122: art. no. 110700. |
| 26 | Oungpakornkaew P, Karin P*, Tongsri R, Hanamura K. Characterization of biodiesel and soot contamination on four-ball wear mechanisms using electron microscopy and confocal laser scanning microscopy. Wear 2020; 458-459: art. no. 203407. |
| 27 | Panpisut P*, Monmaturapoj N, Srion A, Angkananuwat C, Krajangta N, Panthumvanit P. The effect of powder to liquid ratio on physical properties and fluoride release of glass ionomer cements containing pre-reacted spherical glass fillers. Dental Materials Journal 2020; 39(4): 563-570. |
| 28 | Petdum A, Faichu N, Sirirak J, Khammultri P, Promarak V, Panchan W, Sooksimuang T, Charoenpanich A, Wanichacheva N*. [5]Helicene-rhodamine 6 G hybrid-based sensor for ultrasensitive Hg2+ detection and its biological applications. Journal of Photochemistry and Photobiology A: Chemistry 2020; 394: , 1 May 2020, art. no. 112473. |
| 29 | Petdum A, Waraeksiri N, Hanmeng O, Jarutikorn S, Chaneam S, Sirirak J, Charoenpanich A, Panchan W, Sooksimuang T, Wanichacheva N*. A new water-soluble Fe3+ fluorescence sensor with a large Stokes shift based on [5]helicene derivative: Its application in flow injection analysis and biological systems. Journal of Photochemistry and Photobiology A: Chemistry 2020; 401: art. no. 112769. |
| 30 | Phongphut A, Chayasombat B, Cass A.E.G, Sirisuk A, Phisalaphong M, Prichanont S, Thanachayanont C*. Clay/au nanoparticle composites as acetylcholinesterase carriers and modified-electrode materials: A comparative study. Applied Clay Science 2020; 194: art. no. 105704. |
| 31 | Pinsuwan K, Boonthum C, Supasai T, Sahasithiwat S, Kumnorkaew P, Kanjanaboos P*. Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition. Journal of Materials Science 2020; 55(8): 3484-3494. |
| 32 | Pithakratanayothin S*, Tongsri R, Chaisuwan T, Wongkasemjit S, Khemthong P, Limpijumnong S, Pharanchai P, Malaicharoen K. Discovery of mono(u-oxo)dicopper and bis(u-oxo)dicopper in ordered Cu incorporated in SBA-15 via sol-gel process from silatrane at room temperature: An in situ XAS investigation. Microporous and Mesoporous Materials 2020; 301: art. no. 110225. |
| 33 | Preedawiphat P, Mahayotsanun N*, Sucharitpwatskul S, Funazuka T, Takatsuji N, Bureerat S, Dohda K. Finite element analysis of grain size effects on curvature in micro-extrusion. Applied Sciences 2020; 10(14): art. no. 4767. |
| 34 | Rukskul P, Suvannapruk W, Suwanprateeb J*. Cranial reconstruction using prefabricated direct 3DP porous polyethylene. Rapid Prototyping Journal 2020; 26(2): 278-287. |
| 35 | Saengvong P, Boonlakhorn J, Chanlek N, Putasaeng B, Thongbai P*. Giant dielectric permittivity with low loss tangent and excellent non−Ohmic properties of the (Na+ , Sr2+ , Y3+)Cu3Ti4O12 ceramic system. Ceramics International 2020; 46(7): 9780-9785. |
| 36 | Salaluk S, Auepattana-Aumrung K, Thongchaivetcharat K, Lv L.-P, Wang Y, Viyanit E, Crespy D*. Nanonetwork composite coating for sensing and corrosion inhibition. Advanced Materials Interfaces 2020; Article in press. |
| 37 | Sansanaphongpricha K*, Sonthithai P, Kaewkong P, Thavornyutikarn B, Bamrungsap S, Kosorn W, Thinbanmai T, Saengkrit N. Hyaluronic acid-coated gold nanorods enhancing BMP-2 peptide delivery for chondrogenesis. Nanotechnology 2020; 31(43): art. no. 435101. |
| 38 | Sato Y*, Srisawadi S, Tanprayoon D, Suga T, Ohkubo T, Tsukamoto M. Spatter behavior for 316L stainless steel fabricated by selective laser melting in a vacuum. Optics and Lasers in Engineering 2020; 134: art. no. 106209. |
| 39 | Sirisinha C, Sae-oui P, Suchiva K, Thaptong P*. Properties of tire tread compounds based on functionalized styrene butadiene rubber and functionalized natural rubber. Journal of Applied Polymer Science 2020; 137(20): art. no. 48696. |
| 40 | Sochu W, Noraphaiphipaksa N, Manonukul A, Kanchanomai C*. Determination of crack-tip opening displacement in T-type wedge opening loaded specimen. Experimental Mechanics 2020; 60(2): 145-152. |
| 41 | Sonnemann G*, Schrijvers D, Asselin A, Poolsawad N, Mungkalasiri J, Grant T, Loyola C, Vigon B. Updating and road-testing life cycle inventory data review criteria: Toward global consensus and guidance on data quality assessment. Integrated Environmental Assessment and Management 2020; 16(4): 517-524. |
| 42 | Soongprasita K, Sricharoenchaikul V, Atong D*. Phenol-derived products from fast pyrolysis of organosolv lignin. Energy Reports 2020: Article in Press. |
| 43 | Sorcar S, Yoriya S, Lee H, Grimes C.A*, Feng S.P. A review of recent progress in gas phase CO2 reduction and suggestions on future advancement. Materials Today Chemistry 2020; 16: art. no. 100264. |
| 44 | Srisawadi S*, Tanprayoon D, Sato Y, Tsukamoto M, Suga T. Fabrication of 316L stainless steel with TiN addition by vacuum laser powder bed fusion. Optics and Laser Technology 2020; 126: art. no. 106116. |
| 45 | Suwanamornlert P, Kerddonfag N, Sane A, Chinsirikul W, Zhou W, Chonhenchob V*. Poly(lactic acid)/poly(butylene-succinate-co-adipate) (PLA/PBSA) blend films containing thymol as alternative to synthetic preservatives for active packaging of bread. Food Packaging and Shelf Life 2020; 25: art. no. 100515. |
| 46 | Swe K.Z, Naikaew A, Kaewurai P, Pansa-Ngat P, Sahasithiwat S, Kangkaew L, Rugmai S, Soontaranon S, Kanjanaboos P*. Layered perovskite with compact morphology and reduced grain size via vacuum assisted crystallization for luminescence applications. Optical Materials Express 2020; 10(5): 1182-1192. |
| 47 | Tanprayoon D*, Srisawadi S, Sato Y, Tsukamoto M, Suga T. Microstructure and hardness response of novel 316L stainless steel composite with TiN addition fabricated by SLM. Optics and Laser Technology 2020; 129: art. no. 106238. |
| 48 | Thirabunjongcharoen S, Bumroongsakulsawat P, Praserthdam P, Charojrochkul S, Assabumrungrat S, Kim-Lohsoontorn P*. Thermally double coupled reactor coupling aqueous phase glycerol reforming and methanol synthesis. Catalysis Today 2020; Article in press. |
| 49 | Ukkakimapan P, Sattayarut V, Wanchaem T, Yordsri V, Phonyiem M, Ichikawa S, Obata M, Fujishige M, Takeuchi K*, Wongwiriyapan, W*, Endo M. Preparation of activated carbon via acidic dehydration of durian husk for supercapacitor applications. Diamond and Related Materials 2020; 107: art. no. 107906. |
| 50 | Vanichvattanadecha C, Singhapong W, Jaroenworaluck A*. Different sources of silicon precursors influencing on surface characteristics and pore morphologies of mesoporous silica nanoparticles. Applied Surface Science 2020; 513: art. no. 145568. |
| 51 | Wichangarm M, Matthujak A*, Sriveerakul T, Sucharitpwatskul S, Phongthanapanich S. Investigation on thermal efficiency of LPG cooking burner using computational fluid dynamics. Energy 2020; 203: art. no. 117849. |
| 52 | Yoosuk B*, Silajan A, Prasassarakich P*. Deep adsorptive desulfurization over ion-exchanged zeolites: Individual and simultaneous effect of aromatic and nitrogen compounds. Journal of Cleaner Production 2020; 248: art. no. 119291. |
| 53 | Yoriya S*, Tepsri P. Separation process and microstructure-chemical composition relationship of cenospheres from lignite fly ash produced from coal-fired power plant in Thailand. Applied Sciences 2020; 10(16): art. no. 5512. |
| 54 | Zailani W.W.A, Bouaissi A*, Al Bakri Abdullah M.M*, Abd Razak R, Yoriya S, Mohd Salleh M.A.A, Mohd Remy Rozainy M.A.Z, Fansuri H. Bonding strength characteristics of FA-based geopolymer paste as a repair material when applied on opc substrate. Applied Sciences 2020; 10(9): art. no. 3321. |
| บทความตีพิมพ์ในวารสารนานาชาติ | |
| ตามรายชื่อของ Citation Index | |
| No. | List of Publications |
| 55 | Azimi E*, Abdullah M*, Vizureanu P*, Salleh M, Sandu A, Chaiprapa J, Yoriya S, Hussin K, Aziz I. Strength development and elemental distribution of dolomite/fly ash geopolymer composite under elevated temperature. Materials 2020; 13(4): art. no. 1015. |
| 56 | Baimark Y*, Rungseesantivanon W, Prakymoramas N. Synthesis of flexible poly(l-lactide)-b-polyethylene glycol-b-poly(l-lactide) bioplastics by ring-opening polymerization in the presence of chain extender. E-Polymers 2020; 20(1): 423-429. |
| 57 | Chumnanvej S, Luangwattanawilai T, Rawiwet V, Suwanprateeb J, Rattanapinyopituk K, Huaijantug S, Yinharnmingmongkol C, Hemstapat R*. In vivo evaluation of bilayer ORC/PCL composites in a rabbit model for using as a dural substitute. Neurological Research 2020; 42(10): 879-889. |
| 58 | Danwittayakul S*, Muensri P. Polyethyleneimine coated polyacrylonitrile cellulose membrane for colorimetric copper(II) determination. Journal of Water Chemistry and Technology 2020; 42(1): 22-29. |
| 59 | Inthanon K*, Janvikul W, Ongchai S, Chomdej S*. Intrinsic cellular responses of human wharton’s jelly mesenchymal stem cells influenced by O2-plasma-modified and unmodified surface of alkaline-hydrolyzed 2D and 3D PCL scaffolds. Journal of Functional Biomaterials 2019; 10(4): art. no. 52. |
| 60 | Jansomboon W, Loykulnant S, Kongkachuichay P, Dittanet P, Prapainainar P*. Electron beam radiation curing of natural rubber filled with silica-graphene mixture prepared by latex mixing. Industrial Crops and Products 2019; 141: art. no. 111789. |
| 61 | Khaodee W*, Jiwanuruk T, Ountaksinkul K, Charojrochkul S, Charoensuk J, Wongsakulphasatch S, Assabumrungrat S. Compact heat integrated reactor system of steam reformer, shift reactor and combustor for hydrogen production from ethanol. Processes 2020; 8(6): art. no. 708. |
| 62 | Klomjit P*, Khamsuk P, Viyanit E. Root cause analysis of pitting corrosion of AA2024 and AA7075 after exposure in salt fog environment. International Journal of Surface Science and Engineering 2020; Article in press. |
| 63 | Klomjit P*, Palsson N, Khamsuk P, Viyanit E. Pitting corrosion of type 304 stainless steel in high chloride-containing water under hydrodynamic condition. Chiang Mai Journal of Science 2020; 47(2): 229-241. |
| 64 | Koetniyom W, Nopjinda Y, Tepnok R, Tosangthum N, Morakotjinda M, Yotkaew T, Wila P, Tongsri R*. Dry sliding wear behavior of sintered ss316l-sn containing MoS2 solid lubricant. Chiang Mai Journal of Science 2020; 47(4): 838-853. |
| 65 | Koowattanasuchat P, Mahayotsanun N*, Sucharitpwatskul S, Mahabunphachai S, Dohda K. Heat transfer enhancement by shot peening of stainless steel. Coatings 2020; 10(6): art. no. 584. |
| 66 | Kosorn W, Sakulsumbat M, Lertwimol T, Thavornyutikarn B, Uppanan P, Chantaweroad S, Janvikul W*. Chondrogenic phenotype in responses to poly(ɛ-caprolactone) scaffolds catalyzed by bioenzymes: effects of surface topography and chemistry. Journal of Materials Science: Materials in Medicine 2019; 30(12): art. no. 128. |
| 67 | Kyaw P.P, Pongprueksa P, Anuchitolarn W, Sirinukunwatta K, Suputtamongkol K*. Ageing assessment of zirconia implant prostheses by three different quantitative assessment techniques. Journal of Advanced Prosthodontics 2019; 11(5): 253-261. |
| 68 | Nakpathom M*, Somboon B, Narumol N, Mongkholrattanasit R. Application of waste Camellia oleifera fruit shell for printing on PP nonwoven. Journal of the Textile Institute 2020; Article in press. |
| 69 | Naksuk N*, Nakngoenthong J, Printrakoon W, Yuttawiriya R. Real-time temperature measurement using infrared thermography camera and effects on tensile strength and microhardness of hot wire plasma arc welding. Metals 2020; 10(8): art. no. 1046: 1-14. |
| 70 | Narongthong J, Sae-Oui P, Nillawong M, Sirisinha C*. Physicoelectrical Properties and Piezoresistive Sensing of the Extrusion-based Conductive Rubber Composties : Simultaneous Effects of the Extrusion Parameters. Rubber Chemistry and Technology 2020; Article in press. |
| 71 | Narongthong J, Sae-Oui P, Sirisinha, C*. Effects of the extrusion parameters of a co-rotating twin screw extruder and their interactions on the properties of Carbon Black filled Styrene-Butadiene Rubber. KGK Kautschuk Gummi Kunststoffe 2019; 72(10): 63-71. |
| 72 | Ngamsakpasert C, Suriyawong A, Supothina S, Chuaybamroong P*. Post-harvest treatment of carbendazim in Chinese chives using TiO2 nanofiber photocatalysis with different anatase/rutile ratios. Journal of Nanoparticle Research 2020; 22(7): art. no. 174. |
| 73 | Palsson N.S*, Wongpinkaew K, Khamsuk P, Sorachot S, Pongsaksawad W*. Outdoor atmospheric corrosion of carbon steel and weathering steel exposed to the tropical-coastal climate of Thailand. Materials and Corrosion 2020; 71(6): 1019-1034. |
| 74 | Panyo C, Nuntiya A*, Wannagon A. Surface modification of nanosilica from sugarcane bagasse waste ash using methyltrichlorosilane (MTCS), triethoxymethylsilane (TEMS) and triethoxyvinylsilane (TEVS) to produce a hydrophobic surface on glass substrate. Chiang Mai Journal of Science 2020; 47(1): 207-216. |
| 75 | Poolperm P*, Nakkiew W, Naksuk N. Finite element analysis of the effect of porosity on residual stress in 2024 aluminium alloy GTAW. Materials Research Express 2020; 7(5): art. no. 056518. |
| 76 | Prainetr N, Vora-ud A*, Horprathum M, Muthitamongkol P, Thaowonkaew S, Santhaveesuk T, Phan T.B, Seetawan T*. Transfer of P-type to N-type thermoelectric properties of Ag-Sb-Te Thin Film through temperature annealing and its electrical power generation. Journal of Electronic Materials 2020; 49(1): 572-577. |
| 77 | Prainetr N, Vora-ud A*, Thaowonkaew S, Horprathum M, Muthitamongkol P, Seetawan T*. Effect of substrates on thermoelectric properties of Ag–Sb–Te thin films within the temperature annealing. Physica B: Condensed Matter 2020; 582: art. no. 411977. |
| 78 | Preedawiphat P, Mahayotsanun N*, Sa-ngoen K, Noipitak M, Tuengsook P, Sucharitpwatskul S, Dohda K. Mechanical investigations of ASTM A36 welded steels with stainless steel cladding. Coatings 2020; 10(9): art. no. 844. |
| 79 | Sanguanpak S, Chiemchaisri W, Chiemchaisri C*. Membrane fouling and micro-pollutant removal of membrane bioreactor treating landfill leachate. Reviews in Environmental Science and Biotechnology 2019; 18(4): 715-740. |
| 80 | Sangwong N, Suwan M, Supothina S*. Synthesis and optical band gap study of NIR-reflective CoFe2O4 black pigments doped with MgO, CaO and Al2O3. Chiang Mai Journal of Science 2020; 47(4): 686-699. |
| 81 | Santawitee O, Grall S, Chayasombat B, Thanachayanont C, Hochart X, Bernard J, Debéda H*. Processing of printed piezoelectric microdisks: effect of PZT particle sizes and electrodes on electromechanical properties. Journal of Electroceramics 2020; 44(1-2): 41-51. |
| 82 | Sasivatchutikool P*, Nakpathom M. Application of natural dye extracted from Cassia fistula ripe pods for dyeing of silk fabric. Fibers and Polymers 2019; 20(9): 1841-1849. |
| 83 | Saupsor J, Wongsakulphasatch S*, Kim-Lohsoontorn P, Bumroongsakulsawat P, Kiatkittipong W, Ratchahat S, Charojrochkul S, Gong J, Assabumrungrat S, Fe2O3/CaO-Al2O3 multifunctional catalyst for hydrogen production by sorption-enhanced chemical looping reforming of ethanol. Biomass Conversion and Biorefinery 2020; Article in press. |
| 84 | Seawsakul K, Horprathum M*, Eiamchai P, Pattantsetakul V, Limwichean S, Chananonnawathorn C, Muthitamongkol P, Thanachayanont C, Klamchuen A, Wutikhun T, Nakajima H, Sripakdee M, Songsiriritthigul, P*. Influence of vacuum annealing temperature on structural, optical and electrical of nanocolumnar AZO films for TCO application. Chiang Mai Journal of Science 2020; 47(4): 815-822. |
| 85 | Seensattayawong P, Tange M, Songkue S, Manonukul A*. Phase transformation temperature behaviour of NiTi alloys with varied ni contents prepared by micro metal injection moulding. Chiang Mai Journal of Science 2020; 47(2): 297-303. |
| 86 | Siriwong C*, Khansawai P, Boonchiangma S, Sirisinha C, Sae-Oui P. The influence of modified soybean oil as processing aids in tire application. Polymer Bulletin 2020; Article in press. |
| 87 | Somrang P*, Sanngam R.-A, Wannagon A. Humidity control ability of porous ceramics prepared by thermal decomposition of limestone and dolomite. Chiang Mai Journal of Science 2020; 47(1): 217-228. |
| 88 | Soongprasit C, Aht-Ong D, Sricharoenchaikul V, Vichaphund S, Atong D*. Hydrocarbon production from catalytic pyrolysis-GC/MS of Sacha inchi residues using SBA-15 derived from coal fly ash. Catalysts 2020; 10(9): art. no. 1031: 1-19. |
| 89 | Soongprasit K, Vichaphund S, Sricharoenchaikul V, Atong D*. Activity of fly ash-derived ZSM-5 and Zeolite X on fast pyrolysis of Millettia (pongamia) pinnata waste. Waste and Biomass Valorization 2020; 11(2): 715-724. |
| 90 | Srion A, Palanuruksa P, Thammarakcharoen F, Suwanprateeb J*. Low temperature fabrication of brushite by powder-based three dimensional printing coupled with phase transformation process. Chiang Mai Journal of Science 2020; 47(4): 738-751. |
| 91 | Sungkhaphan P, Thavornyutikarn B, Kaewkong P, Singhatanadgit W, Pornsuwan S, Janvikul W*. Clindamycin hydrochloride-loaded composite hydrogel of poly((ethylene glycol) dimethacrylate-glycidyl methacrylate) and mesoporous silica nanoparticles for bacterial infection treatment. Chiang Mai Journal of Science 2020: 47(4): 765-775. |
| 92 | Suwan M*, Sangwong N, Supothina S. Effect of Ni doping and synthesis temperature on the properties of NIR-reflective ZnFe2O4 black pigments. Ceramics - Silikaty 2020; 64(2): 172-179. |
| 93 | Tanodekaew S*, Channasanon S, Kaewkong P. Heat-curing polylactide for bone implants: Preparation and investigation on properties relevant to degradation. Journal of Bioactive and Compatible Polymers 2019; 34(6): 464-478. |
| 94 | Tantanawat T, Srimongkol S*, Yuttawiriya R, Haewchin A, Sangkapes T, Hattha E. Development of a method for measuring oil content in oil palm mesocarp using a single-outlet piston press: a feasibility study. Journal of Food Measurement and Characterization 2020; 14(1): 207-219. |
| 95 | Tepamatra P*, Laosiripojana N, Sesuk T, Charojrochkul S. Effect of samarium and praseodymium addition on water gas shift performance of Co/CeO2 catalysts. Journal of Rare Earths 2020; 38(11): 1201-1206. |
| 96 | Thammarakcharoen F, Suwanprateeb J*. Bmp-2 incorporation into 3d printed porous hydroxyapatite by rapid biomimetic co-precipitation technique using accelerated calcium phosphate solution. Chiang Mai Journal of Science 2020; 47(4): 723-737. |
| 97 | Tran D.V.P, Sancharoen P*, Klomjit P, Tangtermsirikul S. Electrochemical compatibility of patching repaired reinforced concrete: experimental and numerical approach. Journal of Adhesion Science and Technology 2020; 34(8): 828-848. |
| 98 | Tran, D.V.P*, Sancharoen P*, Klomjit P, Tangtermsirikul S. Electrical resistivity and corrosion potential of reinforced concrete: influencing factors and prediction models. Journal of Adhesion Science and Technology 2020; 34(19): 2107-2119. |
| 99 | Vacharapong P, Arayawate S, Henpraserttae S, Katanyutanon S, Charojrochkul S, Lawtrakul L, Toochinda P*. Effect of magnetic inducement in preparation of Ni/Ce-doped Al2O3 for ammonia decomposition. ChemistrySelect 2019; 4(40): 11913-11919. |
| 100 | Vuthiganond N*, Nakpathom M, Mongkholrattanasit R. Azoic deep dyeing of silk and UV protection using plant polyphenols and diazonium coupling. Fibers and Polymers 2020; 21(5): 1052-1060. |
| 101 | Wimuktiwan P, Rodchom M, Soongprasit K, Atong D, Vichaphund S*. Influence of the addition of pore foaming agent on mechanical and thermal properties of porcelain tiles. Ceramics - Silikaty 2020; 64(2): 164-171. |